This controller is a powerful and flexible solution for controlling multiple
Video over IP (VoIP) extenders within same network. The user only
needs to install this unit into the same local network as the extenders
(Transmitter and Receiver) to easily define and configure channel
routing selections, for both unicast and multicast scenarios, using
the WebGUI. It is also possible to define and switch routes using
customized groups or presets allowing for easy control over multiple
video zones. Without the use of this centralized unit, each individual
Transmitter and Receiver in the system would need to be controlled
and configured directly through their own WebGUI.
Additionally, this unit supports controlling the matrix and video
wall modes of connected VoIP units. The settings of all connected
Transmitter/Receiver units, including IP address, netmask and extender
status are clearly displayed within the WebGUI. The WebGUI is easily
accessed via a web browser over a normal network connection or
by directly connecting an HDMI display and USB keyboard & mouse
to the unit. A trigger input interface is also provided to allow the easy
addition of a remote control keypad, or other trigger-supporting
products, which can be installed within a podium or within a table in
a conference room or classroom. This interface can allow the user to
activate stored presets with the simple press of a button. Standard
control is available via WebGUI (remote or local), RS-232, Telnet and IR
Remote.
- Enables the management and configuration of multiple compatible Video over IP (VoIP) extenders through a single WebGUI
- Supports point-to-point (unicast) and multi-to-multi (multicast) routing selections
- Control over both matrix and TV wall modes using WebGUI presets
- Definable display groups
- WebGUI clearly displays the status of all connected Transmitters and Receivers, including IP address, channel selection, etc.
- HDMI output displays the WebGUI and system status
- Supports the use of a USB mouse and keyboard to locally control the WebGUI (Optional)
- Can be powered by Ethernet switches supporting the IEEE 802.3af2003 PoE standard (Optional)
- Trigger Control Keypad support for easy, single-button, preset activation (Optional)
- Standard control is available via WebGUI (remote or local), RS-232, Telnet, and IR Remote
Inputs
- 1x USB Type-A [1x KEYBOARD / MOUSE / SERVICE Propriety Data]
- 1x 3.5mm [1x Infrared Receiver]
- 1x Terminal Block 5-pin [1x RS-232/422/485/DMX512]
- 1x 10-Pin Terminal Block [1x Trigger]
Outputs
- 1x HDMI [1x Uncompressed AV and Data]
- 1x RJ-45 [1x LAN 1 (PoE) IP Control]
- 1x RJ-45 [1x LAN 2 IP Control]
- 3x 1-Pin Terminal Block [1x RS-232]
PSU: 5V/2.6A
Dimensions: 231mm [W] x 117mm [D] x 25mm [H]
Net Weight: 250g
• 1×IP Master Controller
• 1×5V/2.6A DC Power Adapter
• 1×Terminal Block (3-pin)
• 3×Terminal Block (5-pin)
• 1×3.5mm to IR Extender Cable
• 1×Remote Control (CR-183)
• 1×Shockproof Feet (Set of 4)
• 1×Operation Manual
Please
sign in for access to files.
