This IP Master Controller is a powerful and exible solution for controlling
multiple SDVoE (Software De ned Video over Ethernet) based extenders
within same network. The user only needs to install this unit into the same
local network as the extenders (transmitters and receivers) to easily de
ne and con gure channel routing selections (including video, audio, and a
variety of control interface types) using the WebGUI. Without the use of this
centralized control unit, each transmitter and receiver pair would only be able
to function in a point-to-point capacity.
Additionally, this unit supports controlling and con guring the matrix, video
wall, and multiviewer modes of connected SDVoE units. The settings of all
connected transmitter/receiver units, including IP con guration, compatibility
settings, and extender status are clearly displayed within the WebGUI. A
trigger input interface is also provided to allow the easy addition of a remote
control keypad, or other trigger-supporting products, which can be installed
within a podium or table in a conference room or classroom. This interface
can allow the user to activate stored macros with the simple press of a
button. Standard control is available via WebGUI (remote or local), RS-232,
Telnet and IR Remote.
- Enables the management and cofiguration of multiple compatible SDVoE extenders through a single WebGUI
- Provides control over the independent routing of video, audio and control signals between all local compatible transmitters and receivers
- Control over matrix, video wall, and multiviewer modes using WebGUI macros
- WebGUI clearly displays the status of all connected Transmitters and Receivers, including IP address, channel selection, etc.
- Can generate serial commands to directly control an external serialcontrollable device
- Can be powered by Ethernet switches supporting the IEEE 802.3af 2003 PoE standard (Optional)
- Trigger Control Keypad support for easy, single-button, macro activation (Optional)
- Standard control is available via WebGUI (remote or local), RS-232, Telnet, and IR Remote
1× IP Master Controller (SDVoE) • 1× 5V/2.5A DC Power Adapter
• 1× Terminal Block (3-pin)
• 3× Terminal Block (5-pin)
• 1× IR Extender Cable
• 1× Remote Control (CR-183) • 1× Shockproof Feet (Set of 4)
• 1× Operation Manual
Please
sign in for access to files.
